Oxygen Reduction Reaction Selectivity Research Articles

A Non‐Macrocycle Thiolate‐Based Cobalt Catalyst for Selective O2 Reduction into H2O

AbstractThe reduction of dioxygen to produce selectively H2O2 or H2O is crucial in various fields. While platinum‐based materials excel in 4H+/4e− oxygen reduction reaction (ORR) catalysis, cost and resource limitations drive the search for cost‐effective and abundant transition metal catalysts. It is thus of great importance to understand how the selectivity and efficiency of 3d‐metal ORR catalysts can be tuned. In this context, we report on a Co complex supported by a bisthiolate N2S2‐donor ligand acting as a homogeneous ORR catalyst in acetonitrile solutions both in the presence of a one‐electron reducing agent (selectivity for H2O of 93 % and TOFi=3 000 h−1) and under electrochemically‐assisted conditions (0.81 V <η<1.10 V, selectivity for H2O between 85 % and 95 %). Interestingly, such a predominant 4H+/4e− pathway for Co‐based ORR catalysts is rare, highlighting the key role of the thiolate donor ligand. Besides, the selectivity of this Co catalyst under chemical ORR conditions is inverse with respect to the Mn and Fe catalysts supported by the same ligand, which evidences the impact of the nature of the metal ion on the ORR selectivity.

Sulfur-Tuned Main-Group Sb-N-C Catalysts for Selective 2-Electron and 4-Electron Oxygen Reduction.

The selective oxygen reduction reaction (ORR) is important for various energy conversion processes such as the fuel cells and metal-air batteries for the 4e- pathway and hydrogen peroxide (H2O2) electrosynthesis for the 2e- pathway. However, it remains a challenge to tune the ORR selectivity of a catalyst in a controllable manner. Herein, we report an efficient strategy for introducing sulfur dopants to regulate the ORR selectivity of main-group Sb-N-C single-atom catalysts. Significantly, Sb-N-C with the highest sulfur content follows a 2e- pathway with a high H2O2 selectivity (96.8%) and a remarkable mass activity (96.1 A g-1 at 0.65V), while the sister catalyst with the lowest sulfur content directs a 4e- pathway with a half-wave potential (E1/2 = 0.89V) that is more positive than commercial Pt/C. In addition, practical applications for these two 2e-/4e- ORR catalysts are demonstrated by bulk H2O2 electrosynthesis for the degradation of organic pollutants and a high-power zinc-air battery, respectively. Combined experimental and theoretical studies reveals that the excellent selectivity for the sulfurized Sb-N-Cs is attributed to the optimal adsorption-desorption of the ORR intermediates realized through the electronic structure modulation by the sulfur dopants. This article is protected by copyright. All rights reserved.

Second-Shell N Dopants Regulate Acidic O2 Reduction Pathways on Isolated Pt Sites.

Pt is a well-known benchmark catalyst in the acidic oxygen reduction reaction (ORR) that drives electrochemical O2-to-H2O conversion with maximum chemical energy-to-electricity efficiency. Once dispersing bulk Pt into isolated single atoms, however, the preferential ORR pathway remains a long-standing controversy due to their complex local coordination environment and diverse site density over substrates. Herein, using a set of carbon nanotube supported Pt-N-C single-atom catalysts, we demonstrate how the neighboring N dopants regulate the electronic structure of the Pt central atom and thus steer the ORR selectivity; that is, the O2-to-H2O2 conversion selectivity can be tailored from 10% to 85% at 0.3 V versus reversible hydrogen electrode. Moreover, via a comprehensive X-ray-radiated spectroscopy and shell-isolated nanoparticle-enhanced Raman spectroscopy analysis coupled with theoretical modeling, we reveal that a dominant pyridinic- and pyrrolic-N coordination within the first shell of Pt-N-C motifs favors the 4e- ORR, whereas the introduction of a second-shell graphitic-N dopant weakens *OOH binding on neighboring Pt sites and gives rise to a dominant 2e- ORR. These findings underscore the importance of the chemical environment effect for steering the electrochemical performance of single-atom catalysts.

Boosting Oxygen Reduction Reaction Selectivity in Metal Nanoparticles with Polyoxometalates.

The lack of selectivity toward the oxygen reduction reaction (ORR) in metal nanoparticles can be linked to the generation of intermediates. This constitutes a crucial constraint on the performance of specific electrochemical devices, such as fuel cells and metal-air batteries. To boost selectivity of metal nanoparticles, a novel methodology that harnesses the unique electrocatalytic properties of polyoxometalates (POM) to scavenge undesired intermediates of the ORR (such as HO2 -) promoting selectivity is proposed. It involves the covalent functionalization of metal nanoparticle's surface with an electrochemically active capping layer containing a new sulfur-functionalized vanadium-based POM (AuNP@POM). To demonstrate this approach, preformed thiolate Au(111) nanoparticles with a relatively poor ORR selectivity are chosen. The dispersion of AuNP@POM on the surface of carbon nanofibers (CNF) enhances oxygen diffusion, and therefore the ORR activity. The resulting electrocatalyst (AuNP@POM/CNF) exhibits superior stability against impurities like methanol and a higher pH tolerance range compared to the standard commercial Pt/C. The work demonstrates for the first time, the use of a POM-based electrochemically active capping layer to switch on the selectivity of poorly selective gold nanoparticles, offering a promising avenue for the preparation of electrocatalyst materials with improved selectivity, performance, and stability for ORR-based devices.

Recent Progress of Transition Metal Selenides for Electrochemical Oxygen Reduction to Hydrogen Peroxide: From Catalyst Design to Electrolyzers Application.

Hydrogen peroxide (H2 O2 ) is a highly value-added and environmental-friendly chemical with various applications. The production of H2 O2 by electrocatalytic 2e- oxygen reduction reaction (ORR) has emerged as a promising alternative to the energy-intensive anthraquinone process. High selectivity Catalysts combining with superior activity are critical for the efficient electrosynthesis of H2 O2 . Earth-abundant transition metal selenides (TMSs) being discovered as a classic of stable, low-cost, highly active and selective catalysts for electrochemical 2e- ORR. These features come from the relatively large atomic radius of selenium element, the metal-like properties and the abundant reserves. Moreover, compared with the advanced noble metal or single-atom catalysts, the kinetic current density of TMSs for H2 O2 generation is higher in acidic solution, which enable them to become suitable catalyst candidates. Herein, the recent progress of TMSs for ORR to H2 O2 is systematically reviewed. The effects of TMSs electrocatalysts on the activity, selectivity and stability of ORR to H2 O2 are summarized. It is intended to provide an insight from catalyst design and corresponding reaction mechanisms to the device setup, and to discuss the relationship between structure and activity.

ZnMn2O4 spinel nanocrystals-decorated multi-walled carbon nanotubes for oxygen reduction: Experimental and theoretical studies on the strong coupling facilitated four-electron selectivity

In this work, we have successfully formulated a single-step hydrothermal synthesis of mixed transition metal oxide nanocrystals (ZnMn2O4) strongly coupled on carbon support (MWCNTs) that acts as an efficient electrocatalyst for the electrochemical oxygen reduction reaction (ORR). The results depict that the composite, MWCNTs@ZnMn2O4 shows better electrocatalytic activity as compared to the activity exhibited by its individual components MWCNTs and ZnMn2O4 combined, attributed to the strong coupling between the two components. Transmission electron images of the composite depict that ZnMn2O4 nanocrystals have been successfully integrated on MWCNTs resulting in high conductivity and activity. The composite, MWCNTs@ZnMn2O4 exhibits an onset potential of 0.9 V vs. RHE, 99 % four-electron ORR selectivity, and high stability. The high selectivity and stability are assigned due to the strong coupling of ZnMn2O4 to MWCNTs through Zn/Mn–O–C bonds which are proved from DFT studies. The presence of Zn/Mn–O–C bonds is verified from X-ray photoelectron spectroscopy.

The Trade-Off Relationship between Particle Proximity Effect and Low-Pt Loading to Optimize Oxygen Reduction and Methanol Oxidation Reaction Activity

Pt-based electrocatalysts have long been considered as the most effective oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) catalysts due to their excellent intrinsic activity. For supported catalysts, Pt loading, particle size, interparticle distance (ipd), and interaction with support are identified as key contributors for high activity and selectivity. The proximity effect is a relatively new topic in catalysis research. There is a contradiction between the traditional view which induces the electronic interaction to reduce the activity and the new view which causes the electrical double-layer overlap of adjacent nanoclusters, changes the potential distribution and improves the specific activity. [1, 2]To this end, we have developed the nitrogen-doped graphite-like carbon sheets supporting low-Pt loading (Pt@N-GC) with uniform sizes and controllable ipd, and disentangled the main effect of ipd on ORR activity/selectivity and MOR activity/CO tolerance. Combining electrochemical tests and the trade-off mechanism between proximity effect and low-Pt loading, the following trends were obtained:1) 10.0 wt% Pt@N-GC with highest Pt loading and lowest ipd inhibits 2e- ORR by strong adsorption and reabsorption of *OOH due to the presence of closer Pt sites, and improves 4e- ORR selectivity. However, the mass activity/specific activity reached the maximum under the optimal low-Pt loading of 5.0 wt%.2) Similarly, 10.0 wt% Pt@N-GC weakened the adsorption of the -OH group of oxidized COads intermediates, led to the strong adsorption of COads on the catalyst surface, inactivated of Pt sites and reduced the CO resistance. Considering the need to improve CO tolerance while increasing MOR activity, the 5.0 wt% low-Pt loading catalyst exhibiting the best MOR performance under the optimal ipd.3) Benefiting by the synergistic effect of Pt nanoparticles and N-GC support, all Pt@N-GCs exhibit bifunctional electrocatalytic activity and durability.We attribute these findings to the underlying mechanism trade-off between the particle proximity effect and low-Pt loading under the uniform particle size and controlled ipd (Figure. 1). We believe the proximity effect has positive and negative effects, how to maximize the advantages of proximity effect can provide valuable guidance for the design and optimization of low-Pt loading bifunctional electrocatalysts in the future.[1] M. Nesselberger, M. Roefzaad, R.F. Hamou, P.U. Biedermann, F.F. Schweinberger, S. Kunz, K. Schloegl, G.K. Wiberg, S. Ashton, U. Heiz, K.J. Mayrhofer, M. Arenz, Nat. Mater., 12 (2013) 919-924.[2] M. Watanabe, H. Sei, P. Stonehart, J. Eelectroanal. Chem., 261 (1989) 375-387. Figure 1. The trade-off mechanism analysis between proximity effect and low-Pt loading. Figure 1

(Invited) Enhanced Material Durability of Transition Metal-Antimony X-Ide Nanoparticles in Oxygen Reduction Electrocatalysis

Hydrogen fuel cells (FCs) are key energy devices that can accelerate our transition away from non-renewable, carbon-intensive fuels especially in the grid-scale storage and transportation sectors. FC cathodes perform the oxygen reduction reaction (ORR), and despite decades of progress towards higher performance electrocatalysts, the ORR remains kinetically sluggish and limits the efficiency of assembled FC devices. Modern, commercially available FC cathodes typically contain platinum (Pt)-based catalysts that can cause the overall FC to become prohibitively expensive for some applications so identifying alternate non-platinum group ORR catalyst formulations could increase deployment of FCs. Physics-based calculations with density functional theory (DFT) have predicted many first-row transition metal oxides (MOx, M = Mn, Fe, Cr, Ni, Co) as having favorable ORR performance trends. Additionally, there is experimental validation of nanoscale ternary and quaternary transition metal oxide systems with a mixture of transition metals used for catalyzing the ORR where relatively modest activity enhancements are reported. Despite this progress, an important limitation is present in the low material stability of non-precious transition metal oxides especially in acidic environments such as those encountered in proton exchange membrane FCs. Using synthetic material strategies to overcome such stability limitations in a variety of FC operating conditions will provide a deeper understanding of the relationship between structure, activity, and degradation.In this work, we employ two simultaneous strategies to work towards enhancing the activity and stability of transition metal oxides: (1) addition of antimony (Sb) as a ligand and (2) functionalization with nitrogen or sulfur. We utilized a previously reported colloidal synthesis for uniform ~ 50 nm oxide nanoparticles for manganese, nickel, cobalt, and iron to produce four sets of nanoparticles based on each of these metals. By using a colloidal synthesis that concurrently introduces Sb with the secondary metal and drying the particles afterwards, we incorporate Sb evenly throughout the polycrystalline structure of the of these nanoparticle catalysts. A high temperature surface modification reaction with reactive gas such as air, ammonia, or hydrogen sulfide was used to convert any remaining transition metal antimonate into an oxide, nitride, or sulfide, respectively. In total, twelve materials are used in this study: the oxide, nitride, and sulfide (collectively “X-ides”) of each of the four transition metal containing, antimony incorporated nanoparticles. We optimize this material synthesis and evaluate the nanoparticle catalyst’s ability to enhance electrochemical ORR activity in both acidic (pH 1) and alkaline (pH 13) conditions which are simulating operating conditions of proton-exchange membrane and anion-exchange membrane FCs, respectively. In addition to activity modulation, we measure the ORR selectivity change towards hydrogen peroxide formation for each material and note the role of nitrogen and sulfur modification in suppressing hydrogen peroxide formation in alkaline environments. In addition to electrochemical characterization, we employed a vast array of bulk and surface characterization techniques to understand catalyst dynamics and contextualize observed activity trends. Transmission electron microscopy (TEM) enabled determination of particle sizes and morphologies alongside electron diffraction patterns to validate the catalyst synthesis. X-ray diffraction (XRD) then provided further information about crystallinity that connected bulk-level insights to the local information from TEM. X-ray photoelectron spectroscopy (XPS) enabled determination of oxidation state changes in the transition metal and in Sb that serve as important descriptors for estimating the activity of these catalysts. We also employed in situ/operando techniques to probe catalyst dynamics and stability under various conditions. Using manganese K-edge synchrotron x-ray absorption spectroscopy (XAS) on the manganese antimony X-ides, we find significant changes to oxidation state and coordination of manganese in the nitride and sulfide as a function of potential indicating processes that displace nitrogen and sulfur in the lattice under certain conditions. Lastly, we use an in situ electrochemical flow cell coupled to inductively coupled plasma-mass spectrometry (ICP-MS) to measure corrosion as a function of ORR current density, potential sweeping, and electrolyte gas saturation to determine degradation patterns. Insights from all these techniques provide a fascinating perspective on what factors in a material and its environment are responsible for enhanced activity, selectivity, and stability. We perform DFT modeling of these systems to further elucidate material properties that are principally responsible for achieving key metrics in activity and stability especially as non-precious catalysts are evaluated for their performance in assembled device conditions. Combining electrochemical experiments, physics-based modeling, and material characterization to better understand structure-performance relationships is a promising path towards accelerating the process of materials discovery for eventual deployment in critical energy applications for the future.

Tuning ORR selectivity of π-conjugated cobalt corroles from 2e- to 4e-

Efficient oxygen reduction reaction (ORR) is crucial for the performance of fuel cells and other electrochemical devices. Seeking for stable and electrochemically selective 2e- and 4e- ORR electrocatalyst is yet a challenge, making the design extremely important and outmost of interest. In this study, we demonstrate a method to tune ORR selectivity by adjusting the local cobalt density through oligo-/polymerization of π-conjugated cobalt(III) A2B and A3-corroles to linear and two-dimensional matrix structures. These heterogeneous catalysts exhibit remarkable physicochemical properties, fast charge transfer kinetics, electrochemical reversibility, and high durability. Unselective three-electron transfer kinetics with n = 2.5–2.9 in between −0.20 V and +0.40 V vs. RHE are detected with the π-conjugated cobalt(III) A2B- corrole polymers. Highly selective four-electron kinetics with n = 3.7 in between −0.20 V and +0.40 V vs. RHE are detected by employing the cobalt A3-corrole oligomers during the ORR catalysis.

Tunable Metal-Free Imidazole-Benzimidazole Electrocatalysts for Oxygen Reduction in Aqueous Solutions.

A series of metal-free imidazole-benzimidazole catalysts (ImBenz-H, ImBenz-NO2 , ImBenz-OCH3 ) for oxygen reduction reaction (ORR) were prepared. We demonstrate that the electrocatalytic O2 reduction by ImBenz-NO2 with the electron-withdrawing group showed high selectivity toward H2 O with the number of electrons transferred (n=3.7) in a neutral aqueous solution. The highest ORR selectivity toward H2 O2 was achieved using ImBenz-H (n=2.4) in an alkaline solution. Electrochemical studies of reaction kinetics disclosed that the highest turnover frequencies were obtained from ImBenz-H in both neutral and alkaline aqueous solutions. The results prove that the ORR selectivity is tunable by modulating the substituent of the ImBenz catalysts. Furthermore, DFT calculations suggested that the ORR mechanism of ImBenz-H involves the electron transfer from imidazole-benzimidazole to O2 resulting in the formation of H2 O2 which supports the redox active properties of the catalysts ImBenz.

Cations Determine the Mechanism and Selectivity of Alkaline Oxygen Reduction Reaction on Pt(111)**

AbstractThe proton‐coupled electron transfer (PCET) mechanism of the oxygen reduction reaction (ORR) is a long‐standing enigma in electrocatalysis. Despite decades of research, the factors determining the microscopic mechanism of ORR‐PCET as a function of pH, electrolyte, and electrode potential remain unresolved, even on the prototypical Pt(111) surface. Herein, we integrate advanced experiments, simulations, and theory to uncover the mechanism of the cation effects on alkaline ORR on well‐defined Pt(111). We unveil a dual‐cation effect where cations simultaneously determine i) the active electrode surface by controlling the formation of Pt−O and Pt−OH overlayers and ii) the competition between inner‐ and outer‐sphere PCET steps. The cation‐dependent transition from Pt−O to Pt−OH determines the ORR mechanism, activity, and selectivity. These findings provide direct evidence that the electrolyte affects the ORR mechanism and performance, with important consequences for the practical design of electrochemical systems and computational catalyst screening studies. Our work highlights the importance of complementary insight from experiments and simulations to understand how different components of the electrochemical interface contribute to electrocatalytic processes.

Cations Determine the Mechanism and Selectivity of Alkaline Oxygen Reduction Reaction on Pt(111).

The proton-coupled electron transfer (PCET) mechanism of the oxygen reduction reaction (ORR) is a long-standing enigma in electrocatalysis. Despite decades of research, the factors determining the microscopic mechanism of ORR-PCET as a function of pH, electrolyte, and electrode potential remain unresolved, even on the prototypical Pt(111) surface. Herein, we integrate advanced experiments, simulations, and theory to uncover the mechanism of the cation effects on alkaline ORR on well-defined Pt(111). We unveil a dual-cation effect where cations simultaneously determine i) the active electrode surface by controlling the formation of Pt-O and Pt-OH overlayers and ii) the competition between inner- and outer-sphere PCET steps. The cation-dependent transition from Pt-O to Pt-OH determines the ORR mechanism, activity, and selectivity. These findings provide direct evidence that the electrolyte affects the ORR mechanism and performance, with important consequences for the practical design of electrochemical systems and computational catalyst screening studies. Our work highlights the importance of complementary insight from experiments and simulations to understand how different components of the electrochemical interface contribute to electrocatalytic processes.

Boron-doped rGO electrocatalyst for high effective generation of hydrogen peroxide: Mechanism and effect of oxygen-enriched air

Different B-doped rGO catalysts were prepared and their 2e- oxygen reduction reaction (ORR) performance was investigated. It was found that the 2e- ORR selectivity of B-doped rGO was related to the B content and oxygen mass transfer conditions. The synthesized catalyst exhibited high 2e- ORR selectivity of 95–98.6%, and the H2O2 yield reached up to 95.63 mg cm−2 h−1 at a current density of 200 mA cm−2. Moreover, increasing the oxygen concentration in the gas supplied to the B-doped rGO modified gas diffusion electrode (GDE) only to 30–40% resulted in almost the same H2O2 yield as using pure oxygen. Experimental analysis and theoretical calculations indicated that the isolated B dopant acts as active site for the 2e- ORR. Furthermore, B-doped rGO modified GDE was applied to the electro-Fenton system to continuously degrade organic pollutants. This work will be beneficial for the study and application of carbon-based ORR catalysts.

Lattice Distortion and H-passivation in Pure Carbon Electrocatalysts for Efficient and Stable Two-electron Oxygen Reduction to H2 O2.

The exploration of inexpensive and efficient catalysts for oxygen reduction reaction (ORR) is crucial for chemical and energy industries. Carbon materials have been proved promising with different catalysts enabling 2 and 4e- ORR. Nevertheless, their ORR activity and selectivity is still complex and under debate in many cases. Many structures of these active carbon materials are also chemically unstable for practical implementations. Unlike the well-discussed structures, this work presents a strategy to promote efficient and stable 2e- ORR of carbon materials through the synergistic effect of lattice distortion and H-passivation (on the distorted structure). We show how these structures can be formed on carbon cloth, and how the reproducible chemical adsorption can be realized on these structures for efficient and stable H2 O2 production. The work here gives not only new understandings on the 2e- ORR catalysis, but also the robust catalyst which can be directly used in industry.

Lattice Distortion and H‐passivation in Pure Carbon Electrocatalysts for Efficient and Stable Two‐electron Oxygen Reduction to H2O2

AbstractThe exploration of inexpensive and efficient catalysts for oxygen reduction reaction (ORR) is crucial for chemical and energy industries. Carbon materials have been proved promising with different catalysts enabling 2 and 4e− ORR. Nevertheless, their ORR activity and selectivity is still complex and under debate in many cases. Many structures of these active carbon materials are also chemically unstable for practical implementations. Unlike the well‐discussed structures, this work presents a strategy to promote efficient and stable 2e− ORR of carbon materials through the synergistic effect of lattice distortion and H‐passivation (on the distorted structure). We show how these structures can be formed on carbon cloth, and how the reproducible chemical adsorption can be realized on these structures for efficient and stable H2O2 production. The work here gives not only new understandings on the 2e− ORR catalysis, but also the robust catalyst which can be directly used in industry.

Single-Atom Catalysts for Selective Oxygen Reduction: Transition Metals in Uniform Carbon Nanospheres with High Loadings.

Transition metal single-atom catalysts (SACs) in uniform carbon nanospheres have gained tremendous interest as electrocatalysts owing to their low cost, high activity, and excellent selectivity. However, their preparation typically involves complicated multistep processes that are not practical for industrial use. Herein, we report a facile one-pot method to produce atomically isolated metal atoms with high loadings in uniform carbon nanospheres without any templates or postsynthesis modifications. Specifically, we use a chemical confinement strategy to suppress the formation of metal nanoparticles by introducing ethylenediaminetetraacetic acid (EDTA) as a molecular barrier to spatially isolate the metal atoms and thus generate SACs. To demonstrate the versatility of this synthetic method, we produced SACs from multiple transition metals, including Fe, Co, Cu, and Ni, with loadings as high as 3.87 wt %. Among these catalytic materials, the Fe-based SACs showed remarkable catalytic activity toward the oxygen reduction reaction (ORR), achieving an onset and half-wave potential of 1.00 and 0.831 VRHE, respectively, comparable to that of commercial 20 wt % Pt/C. Significantly, we were able to steer the ORR selectivity toward either energy generation or hydrogen peroxide production by simply changing the transition metal in the EDTA-based precursor.

Simultaneously tuning electronic reaction pathway and photoactivity of P, O modified cyano-rich carbon nitride enhances the photosynthesis of H2O2

The photocatalytic production H2O2 performance is mainly limited by the low photoactivity and the low 2e- oxygen reduction reaction (ORR) selectivity. In this work, the cyano-rich carbon nitride with P, O modified (CNOP) was synthesized, which benefits from enhanced optical activity, improved 2e- ORR selectivity (40% vs. 90%) and regulated the electronic reaction pathway for the generation of H2O2. The best performance of CNOP is 17 times that of CN under visible light and still maintains the high H2O2 production when the wavelength reaches 550 nm (98.8 μΜ h−1). DFT calculations show that CNOP not only benefits O2 adsorption but also greatly the energy barrier for the production of the key intermediate (OOH*). This study provides a simple method to simultaneously tune optical activity, 2e- ORR selectivity and electronic reaction pathway for the efficient production H2O2.

Valorization of Naturally Abundant Low-Value Peat into Highly Active Non-Platinum Group Metal Oxygen Reduction Catalysts

As society continues to adopt an increasingly eco-friendly stance, the efficient usage of natural resources needs to be maximised. For instance, energy obtained from biomass covers roughly a tenth of the global demand. This biomass can instead be used as a carbon source to produce value-added materials such as tnon-platinum group metal (NPGM) oxygen reduction catalysts, which are desperately sought after as global demand for fuel cells continues to rise [1,2]. For example, peat is an extremely abundant biomass material in Estonia covering roughly 20% of the country [3]. Herein, the viability of using peat-based catalysts as oxygen reduction catalysts in alkaline media was investigated.The peat sourced from a local peatland was processed and modified with inexpensive iron and nitrogen precursors through the common double-pyrolysis and acid washing synthesis procedure into peat-based NPGM catalysts. Additionally, zinc chloride was used as a pore forming agent. The influence of several principal synthesis parameters, e.g. precursor compound type and amount, on the physical and electrochemical properties of these materials was investigated using various characterization methods.The NPGM catalysts obtained from naturally abundant peat were highly microporous systems due to the inclusion of zinc chloride in the synthesis mixture. High onset (~0.93 V vs RHE) and half-wave potential (~0.83 V vs RHE) values were obtained for most of the materials in activity screening experiments conducted with a rotating disc electrode setup using 0.1 M KOH. However, using an excessive amount of the nitrogen precursor in the synthesis proved to be detrimental to the obtained activity. The high activity of the obtained peat-derived catalysts was further investigated in a rotating ring disc electrode setup where the influence of the studied synthesis parameters on the oxygen reduction reaction selectivity was more evident. Acknowledgments This work was supported by the EU through the European Regional Development Fund under projects TK141 “Advanced materials and high-technology devices for energy recuperation systems” (2014-2020.4.01.15-0011), NAMUR “Nanomaterials - research and applications” (3.2.0304.12-0397), NAMUR+ core facility funded by the Estonian Research Council (TT 13), PRG676 “Development of express analysis methods for micro-mesoporous materials for Estonian peat derived carbon supercapacitors” (01.01.2020–31.12.2024) and PUT1581 (1.01.2017–31.12.2020). References F. Jaouen, D. Jones, N. Coutard, V. Artero, P. Strasser, A. Kucernak, Johns. Matthey Technol Rev. 2018, 62, 231. E4tech, 2022, The Fuel Cell Industry Review 2021. M. Orru, H. Orru, Est. J. Earth Sci. 2008, 57, 87.

A Cobalt(III) Corrole with a Tethered Imidazole for Boosted Electrocatalytic Oxygen Reduction Reaction

Comprehensive SummaryDeveloping electrocatalysts with high activity and selectivity for the oxygen reduction reaction (ORR) is vital to promote the performance of the next‐generation energy technologies, which depend on the efficiency of the catalytic reduction of dioxygen. In the structure of cytochrome c oxidases (CcOs), a histidine imidazole residue binding to the axial position of Fe plays a crucial role in facilitating the selective reduction of O2 to water. Inspired by nature, we herein report on the synthesis of CoIII corrole 1 tethered with an imidazole ligand as well as its electrocatalytic ORR and O2 binding features. As compared to the imidazolium‐free analogue, complex 1 displayed remarkably boosted activity for the selective four‐electron/four‐proton (4e‐/4H+) ORR with a half‐wave potential of E1/2 = 0.82 V versus reversible hydrogen electrode (RHE) in 0.1 mol/L KOH solutions. Importantly, we demonstrate that the tethered axial imidazole ligand improves the O2 binding ability of 1 thermodynamically and dynamically, which is crucial to boost electrocatalytic ORR performance. This work presents an example to improve electrocatalytic ORR activity and selectivity of Co corroles by introducing an axial imidazole ligand to enhance the O2 binding and activation.

Dual‐Engineering of Porous Structure and Carbon Edge Enables Highly Selective H2O2 Electrosynthesis

AbstractEdge engineering has emerged as a powerful strategy to activate inert carbon surfaces, and thus achieve a notable enhanced electrocatalytic activity. However, the rational manipulation of carbon edges to achieve enhanced catalytic performance remains a formidable challenge, primarily hindered by immature synthesis methods and the obscured understanding of the structure‐activity relationship. Herein, an organic–inorganic hybrid co‐assembly strategy is used to fabricate a series of mesoporous carbon nanofibers (MCNFs) with controllable edge site densities and the impact of edge population on electrochemical oxygen reduction reaction (ORR) pathways is investigated. The optimized MCNFs catalyst exhibits a remarkable 2e− ORR performance, as evidenced by a high H2O2 selectivity (>90%) across a wide potential window of 0.6 V and a large cathodic current density of −3.0 mA cm−2 (at 0.2 V vs. reversible hydrogen electrode). Strikingly, the density of carbon edge sites can be changed to tune the ORR activity and selectivity. Experimental validation and density functional theory calculations confirm that the presence of edge defects can optimize the adsorption strength of *OOH intermediates and balance the selectivity and activity of the 2e− ORR process. This study provides a new path to achieve high ORR activity and 2e− selectivity in carbon‐based electrocatalysts.